| Thread Specification | 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) |
|---|---|
| Compatible Tubing | For rigid tubing 1.6/2.0/2.5/3.0/3.2mm OD |
| Pre-tightening Inverted Cone Principle | In a threaded connection, a pre-load is applied before the working load to enhance reliability and tightness, preventing gaps or relative slippage between connected parts after loading |
| Features | Chemical resistance to organic solvents and various chemicals; plug available in PP, PTFE; ferrule optional in PP, PFA |
| Operating Environment | 0.11~0.15 N·m at room temperature, rigid tubing wall thickness ≤0.5mm; 0.15~0.20 N·m at room temperature, wall thickness >0.5mm; 0.20~0.25 N·m at service temperature >100°C or pressure >8 kgf/cm² |
| Applications | Laboratory automation, analytical instruments, pharmaceutical, biotech, OEM |
| Certifications | Manufactured under ISO 9001 QMS · CE/RoHS/FDA compliance varies by model (certificates available upon request) |
FTG-IC-2P is a Pre-Tightening Inverted Cone Fitting. Applies a pre-load before the working load to improve seal reliability and prevent slippage.
Thread specification: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) Compatible tubing: For rigid tubing 1.6/2.0/2.5/3.0/3.2mm OD
Which thread standards are supported?
Most fittings use 1/4-28UNF; some add M6, M8, M10, 10-32UNF or 6-40UNF. Check the spec table per model before ordering.
Can I connect different tubing sizes?
Yes. Use reducing fittings or adapters such as the hard-soft tube adapter and multi-port fitting to join different diameters.
Are these fittings chemically resistant?
Yes — PP, PTFE, PEEK and PPS bodies resist common solvents; verify media compatibility for your specific model.
Do you provide installation tools?
Yes. Torque hand-tightening tool kits and PEEK/PTFE tube cutters are available as accessories for reliable sealing.
FTG-IC-2P 是一款预紧式倒锥接头。在工作载荷前施加预紧力，提升密封可靠性并防止滑移。
螺纹规格: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) 适用管径: 硬管 1.6/2.0/2.5/3.0/3.2mm OD
支持哪些螺纹标准？
多数接头采用 1/4-28UNF；部分增加 M6、M8、M10、10-32UNF 或 6-40UNF。订购前请核对各型号的规格表。
能否连接不同管径？
可以。使用异径接头或硬-软管适配器、多通接头来连接不同直径。
这些接头耐化学腐蚀吗？
耐。PP、PTFE、PEEK、PPS 本体可抵抗常见溶剂；请针对具体型号确认介质兼容性。
是否提供安装工具？
提供。扭矩手动拧紧工具套件与 PEEK/PTFE 切管器作为配件，确保密封可靠。
FTG-IC-2P adalah Fitting Inverted Cone Pramuat. Menerapkan pramuat sebelum beban kerja untuk meningkatkan keandalan segel dan mencegah selip.
Spesifikasi ulir: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) Tubing yang kompatibel: Untuk tubing kaku 1.6/2.0/2.5/3.0/3.2mm OD
Standar ulir apa yang didukung?
Sebagian besar fitting menggunakan 1/4-28UNF; sebagian menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Periksa tabel spec per model sebelum memesan.
Dapatkah saya menyambung ukuran tubing berbeda?
Ya. Gunakan fitting reduksi atau adapter seperti adapter tabung keras-lunak dan multiport untuk menyambung diameter berbeda.
Apakah fitting ini tahan kimia?
Ya — body PP, PTFE, PEEK dan PPS tahan pelarut umum; verifikasi kompatibilitas media untuk model Anda.
Apakah alat instalasi tersedia?
Ya. Kit alat pengencangan torsi tangan dan pemotong tube PEEK/PTFE tersedia sebagai aksesori untuk sealing yang andal.
FTG-IC-2P là Đầu nối côn ngược pretension. Tạo lực pretension trước tải làm việc để tăng độ tin cậy kín khít và chống trượt.
Thông số ren: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) Ống tương thích: Cho ống cứng 1.6/2.0/2.5/3.0/3.2mm OD
Các chuẩn ren nào được hỗ trợ?
Hầu hết đầu nối dùng 1/4-28UNF; một số thêm M6, M8, M10, 10-32UNF hoặc 6-40UNF. Hãy xem bảng thông số từng model trước khi đặt.
Tôi có thể nối các ống khác đường kính không?
Có. Dùng đầu nối thu nhỏ hoặc adapter như adapter ống cứng-mềm và đa cổng để nối các đường kính khác nhau.
Các đầu nối này có chịu hóa chất không?
Có — thân PP, PTFE, PEEK và PPS chịu được dung môi phổ biến; hãy xác nhận tương thích môi chất cho model cụ thể.
Bạn có cung cấp dụng cụ lắp đặt không?
Có. Bộ dụng cụ siết bằng mô-men xoắn tay và máy cắt ống PEEK/PTFE có sẵn như phụ kiện để đảm bảo kín khít.
FTG-IC-2P คือข้อต่อ Inverted Cone แบบพรี้ยำ ให้แรงพรี้ยำก่อนแรงงานเพื่อเพิ่มความน่าเชื่อถือของการปิดผนึกและป้องกันการลื่น
มาตรฐานเกลียว: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) ท่อที่เข้ากันได้: สำหรับท่อแข็ง 1.6/2.0/2.5/3.0/3.2mm OD
รองรับมาตรฐานเกลียวใดบ้าง
ข้อต่อส่วนใหญ่ใช้ 1/4-28UNF บางรุ่นเพิ่ม M6 M8 M10 10-32UNF หรือ 6-40UNF ตรวจสอบตาราง spec ของแต่ละรุ่นก่อนสั่ง
สามารถต่อท่อขนาดต่างกันได้หรือไม่
ได้ ใช้ข้อต่อลดขนาดหรืออะแดปเตอร์เช่น อะแดปเตอร์ท่อแข็ง-อ่อน และ หลายพอร์ต เพื่อต่อเส้นผ่านศูนย์กลางต่างกัน
ข้อต่อเหล่านี้ทนเคมีหรือไม่
ทน ตัวเรือน PP PTFE PEEK และ PPS ทนตัวทำละลายทั่วไป ตรวจสอบความเข้ากันได้ของสื่อสำหรับรุ่นของคุณ
มีเครื่องมือติดตั้งให้หรือไม่
มี ชุดเครื่องมือ การขันด้วยทอร์กมือ และเครื่องตัดท่อ PEEK/PTFE มีเป็นอุปกรณ์เสริมสำหรับการยึดติดที่เชื่อถือได้
FTG-IC-2P ialah Penyambung Inverted Cone Prategang. Mengenakan pramuat sebelum beban kerja untuk meningkatkan kebolehpercayaan meterai dan cegah gelincir.
Spesifikasi benang: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) Tiub serasi: Untuk tiub tegar 1.6/2.0/2.5/3.0/3.2mm OD
Apakah standard benang yang disokong?
Kebanyakan fitting menggunakan 1/4-28UNF; sesetengah menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Semak jadual spec setiap model sebelum memesan.
Bolehkah saya sambung saiz tiub berbeza?
Ya. Gunakan fitting pengurangan atau penyesuai seperti adapter tiub tegar-lembut dan berbilang port untuk menyambung diameter berbeza.
Adakah fitting ini tahan kimia?
Ya — badan PP, PTFE, PEEK dan PPS tahan pelarut biasa; sahkan keserasian media untuk model anda.
Adakah alat pemasangan disediakan?
Ya. Kit alat pengencangan torq tangan dan pemotong tiub PEEK/PTFE tersedia sebagai aksesori untuk sealing yang boleh dipercayai.
FTG-IC-2P ay isang Pre-Tightening Inverted Cone Fitting. Naglalagay ng pre-load bago ang working load para mapabuti ang seal reliability at maiwas ang slippage.
Pamantayan ng thread: 1/4-28UNF (pitch: 0.907mm), M6 (pitch: 1mm) Tubing na tugma: Para sa matibay na tubo 1.6/2.0/2.5/3.0/3.2mm OD
Anong mga standard ng thread ang sinusuportahan?
Karamihan sa mga fitting ay gumagamit ng 1/4-28UNF; ang iba ay nagdaragdag ng M6, M8, M10, 10-32UNF o 6-40UNF. Tingnan ang spec table bawat model bago umorder.
Maaari ba akong magkonekta ng magkaibang sukat ng tubing?
Oo. Gumamit ng reducing fittings o adapters tulad ng adapter para sa matigas at malambot na tubo at maramihang port para ikonekta ang magkaibang diameter.
Ang mga fitting ba ay resistant sa kemikal?
Oo — ang mga PP, PTFE, PEEK at PPS body ay lumalaban sa karaniwang solvents; i-verify ang media compatibility para sa iyong specific model.
Nagbibigay ba kayo ng installation tools?
Oo. Ang mga paghigpit gamit ang kamay tool kit at PEEK/PTFE tube cutter ay available bilang accessories para sa maaasahang sealing.
This product is sourced factory-direct from a certified Chinese manufacturer. You pay the factory price — no markup. Our income comes from the export tax rebate, not from your bill.