| Temperature / Pressure Rating | Long-term working temperature -40°C to 82°C |
|---|---|
| Tubing Inner Diameter | 1/8" to 1/4" (3.2mm to 6.4mm) |
| Features | Features one-hand connect/disconnect with one-piece end tip, easier to use than ball-sleeve designs |
| PMC Series Unit | (mm) |
| Applications | Laboratory automation, analytical instruments, pharmaceutical, biotech, OEM |
| Certifications | Manufactured under ISO 9001 QMS · CE/RoHS/FDA compliance varies by model (certificates available upon request) |
PMC is a PMC Micro Plastic Quick Connector. One-hand connect/disconnect with one-piece end tip.
Compatible tubing: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) Temperature / pressure rating: -40°C to 82°C
Which thread standards are supported?
Most fittings use 1/4-28UNF; some add M6, M8, M10, 10-32UNF or 6-40UNF. Check the spec table per model before ordering.
Can I connect different tubing sizes?
Yes. Use reducing fittings or adapters such as the hard-soft tube adapter and multi-port fitting to join different diameters.
Are these fittings chemically resistant?
Yes — PP, PTFE, PEEK and PPS bodies resist common solvents; verify media compatibility for your specific model.
Do you provide installation tools?
Yes. Torque hand-tightening tool kits and PEEK/PTFE tube cutters are available as accessories for reliable sealing.
PMC 是一款PMC 微型塑料快接。单手插拔，一体式端头。
适用管径: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) 温度 / 压力等级: -40°C to 82°C
支持哪些螺纹标准？
多数接头采用 1/4-28UNF；部分增加 M6、M8、M10、10-32UNF 或 6-40UNF。订购前请核对各型号的规格表。
能否连接不同管径？
可以。使用异径接头或硬-软管适配器、多通接头来连接不同直径。
这些接头耐化学腐蚀吗？
耐。PP、PTFE、PEEK、PPS 本体可抵抗常见溶剂；请针对具体型号确认介质兼容性。
是否提供安装工具？
提供。扭矩手动拧紧工具套件与 PEEK/PTFE 切管器作为配件，确保密封可靠。
PMC adalah Konektor Cepat Plastik Mikro PMC. Sambung/lepas satu tangan dengan ujung satu bagian.
Tubing yang kompatibel: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) Rentang suhu / tekanan: -40°C to 82°C
Standar ulir apa yang didukung?
Sebagian besar fitting menggunakan 1/4-28UNF; sebagian menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Periksa tabel spec per model sebelum memesan.
Dapatkah saya menyambung ukuran tubing berbeda?
Ya. Gunakan fitting reduksi atau adapter seperti hard-soft tube adapter dan multi-port untuk menyambung diameter berbeda.
Apakah fitting ini tahan kimia?
Ya — body PP, PTFE, PEEK dan PPS tahan pelarut umum; verifikasi kompatibilitas media untuk model Anda.
Apakah alat instalasi tersedia?
Ya. Kit alat torque hand-tightening dan pemotong tube PEEK/PTFE tersedia sebagai aksesori untuk sealing yang andal.
PMC là Đầu nối nhanh nhựa vi mô PMC. Cắm/rút một tay với đầu một mảnh.
Ống tương thích: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) Mức nhiệt độ / áp suất: -40°C to 82°C
Các chuẩn ren nào được hỗ trợ?
Hầu hết đầu nối dùng 1/4-28UNF; một số thêm M6, M8, M10, 10-32UNF hoặc 6-40UNF. Hãy xem bảng thông số từng model trước khi đặt.
Tôi có thể nối các ống khác đường kính không?
Có. Dùng đầu nối thu nhỏ hoặc adapter như hard-soft tube adapter và multi-port để nối các đường kính khác nhau.
Các đầu nối này có chịu hóa chất không?
Có — thân PP, PTFE, PEEK và PPS chịu được dung môi phổ biến; hãy xác nhận tương thích môi chất cho model cụ thể.
Bạn có cung cấp dụng cụ lắp đặt không?
Có. Bộ dụng cụ torque hand-tightening và máy cắt ống PEEK/PTFE có sẵn như phụ kiện để đảm bảo kín khít.
PMC คือคอนเนกเตอร์เชื่อมต่อเร็วพลาสติกจิ๋ว PMC ต่อ/ถอดด้วยมือเดียว ด้วยปลายชิ้นเดียว
ท่อที่เข้ากันได้: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) อุณหภูมิ / ระดับความดัน: -40°C to 82°C
รองรับมาตรฐานเกลียวใดบ้าง
ข้อต่อส่วนใหญ่ใช้ 1/4-28UNF บางรุ่นเพิ่ม M6 M8 M10 10-32UNF หรือ 6-40UNF ตรวจสอบตาราง spec ของแต่ละรุ่นก่อนสั่ง
สามารถต่อท่อขนาดต่างกันได้หรือไม่
ได้ ใช้ข้อต่อลดขนาดหรืออะแดปเตอร์เช่น hard-soft tube adapter และ multi-port เพื่อต่อเส้นผ่านศูนย์กลางต่างกัน
ข้อต่อเหล่านี้ทนเคมีหรือไม่
ทน ตัวเรือน PP PTFE PEEK และ PPS ทนตัวทำละลายทั่วไป ตรวจสอบความเข้ากันได้ของสื่อสำหรับรุ่นของคุณ
มีเครื่องมือติดตั้งให้หรือไม่
มี ชุดเครื่องมือ torque hand-tightening และเครื่องตัดท่อ PEEK/PTFE มีเป็นอุปกรณ์เสริมสำหรับการยึดติดที่เชื่อถือได้
PMC ialah Penyambung Pantas Plastik Mikro PMC. Sambung/tanggal satu tangan dengan hujung sekeping.
Tiub serasi: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) Julat suhu / tekanan: -40°C to 82°C
Apakah standard benang yang disokong?
Kebanyakan fitting menggunakan 1/4-28UNF; sesetengah menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Semak jadual spec setiap model sebelum memesan.
Bolehkah saya sambung saiz tiub berbeza?
Ya. Gunakan fitting pengurangan atau penyesuai seperti hard-soft tube adapter dan multi-port untuk menyambung diameter berbeza.
Adakah fitting ini tahan kimia?
Ya — badan PP, PTFE, PEEK dan PPS tahan pelarut biasa; sahkan keserasian media untuk model anda.
Adakah alat pemasangan disediakan?
Ya. Kit alat torque hand-tightening dan pemotong tiub PEEK/PTFE tersedia sebagai aksesori untuk sealing yang boleh dipercayai.
PMC ay isang PMC Micro Plastic Quick Connector. One-hand connect/disconnect with one-piece end tip.
Tubing na tugma: Tubing Inner Diameter: 1/8" to 1/4" (3.2mm to 6.4mm) Saklaw ng temperatura / presyon: -40°C to 82°C
Anong mga standard ng thread ang sinusuportahan?
Karamihan sa mga fitting ay gumagamit ng 1/4-28UNF; ang iba ay nagdaragdag ng M6, M8, M10, 10-32UNF o 6-40UNF. Tingnan ang spec table bawat model bago umorder.
Maaari ba akong magkonekta ng magkaibang sukat ng tubing?
Oo. Gumamit ng reducing fittings o adapters tulad ng hard-soft tube adapter at multi-port para ikonekta ang magkaibang diameter.
Ang mga fitting ba ay resistant sa kemikal?
Oo — ang mga PP, PTFE, PEEK at PPS body ay lumalaban sa karaniwang solvents; i-verify ang media compatibility para sa iyong specific model.
Nagbibigay ba kayo ng installation tools?
Oo. Ang mga torque hand-tightening tool kit at PEEK/PTFE tube cutter ay available bilang accessories para sa maaasahang sealing.
This product is sourced factory-direct from a certified Chinese manufacturer. You pay the factory price — no markup. Our income comes from the export tax rebate, not from your bill.