Home› Products› Fluid Control Components› FTG-IC-3P Inverted Cone
FTG-IC-3P Inverted Cone
FTG-IC-3P Inverted Cone view 1 FTG-IC-3P Inverted Cone view 2 FTG-IC-3P Inverted Cone view 3 FTG-IC-3P Inverted Cone view 4 FTG-IC-3P Inverted Cone view 5

Inverted Cone (3-Piece)

Inverted cone 3-piece fitting, anti-rotation, vibration resistant, color ID. For vehicle analyzers and portable devices in vibration environments.
✓ Transparent sourcing — factory-direct price, no markup
Request a Quote WhatsApp Us

Product Specifications

Thread Specification1/4-28UNF
Compatible TubingFor 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other semi-rigid tubing
RequirementsStandard straight-thread fitting; must be used with ETFE ferrule and stainless steel compression sleeve
FeaturesStandard straight-thread fitting; stainless steel ferrule prevents rigid tubing from rotating while tightening; ideal for pre-assembled tubing and frequent disconnection
ApplicationsLaboratory automation, analytical instruments, pharmaceutical, biotech, OEM
CertificationsManufactured under ISO 9001 QMS · CE/RoHS/FDA compliance varies by model (certificates available upon request)

Product overview

FTG-IC-3P is a Inverted Cone (3-Piece). Uses ETFE ferrule and stainless steel compression sleeve for pre-assembled tubing.

Thread specification: 1/4-28UNF Compatible tubing: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other semi-rigid tubing

Specifications

Selection notes

  1. Match the thread standard (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) to your existing ports before ordering; mixed standards need an adapter.
  2. Confirm tubing outer/inner diameter and rigidity (rigid PTFE/FEP vs soft hose) so you pick the correct fitting type.
  3. Select body material by media: PEEK/PP/PTFE for broad chemical resistance, PPS for higher temperature, stainless steel for high pressure.

Frequently asked questions

Which thread standards are supported?

Most fittings use 1/4-28UNF; some add M6, M8, M10, 10-32UNF or 6-40UNF. Check the spec table per model before ordering.

Can I connect different tubing sizes?

Yes. Use reducing fittings or adapters such as the hard-soft tube adapter and multi-port fitting to join different diameters.

Are these fittings chemically resistant?

Yes — PP, PTFE, PEEK and PPS bodies resist common solvents; verify media compatibility for your specific model.

Do you provide installation tools?

Yes. Torque hand-tightening tool kits and PEEK/PTFE tube cutters are available as accessories for reliable sealing.

产品概述

FTG-IC-3P 是一款倒锥接头（三件式）。配 ETFE 卡套与不锈钢压紧套，适合预装管路。

螺纹规格: 1/4-28UNF 适用管径: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other 半刚性管

技术规格

选型建议

  1. 订购前请将螺纹标准（1/4-28UNF、M6、M8、M10、10-32UNF、6-40UNF）与现有接口对齐；混用标准需适配器。
  2. 确认管材外径/内径与刚性（刚性 PTFE/FEP 还是软管），以选对接头类型。
  3. 按介质选择本体材质：PEEK/PP/PTFE 耐广泛化学腐蚀，PPS 耐更高温度，不锈钢耐高压。

常见问题

支持哪些螺纹标准？

多数接头采用 1/4-28UNF；部分增加 M6、M8、M10、10-32UNF 或 6-40UNF。订购前请核对各型号的规格表。

能否连接不同管径？

可以。使用异径接头或硬-软管适配器、多通接头来连接不同直径。

这些接头耐化学腐蚀吗？

耐。PP、PTFE、PEEK、PPS 本体可抵抗常见溶剂；请针对具体型号确认介质兼容性。

是否提供安装工具？

提供。扭矩手动拧紧工具套件与 PEEK/PTFE 切管器作为配件，确保密封可靠。

Ikhtisar produk

FTG-IC-3P adalah Inverted Cone (3-Bagian). Menggunakan ferrule ETFE dan sleeve kompresi stainless steel untuk tubing pra-rakit.

Spesifikasi ulir: 1/4-28UNF Tubing yang kompatibel: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other tubing setengah kaku

Spesifikasi

Catatan pemilihan

  1. Cocokkan standar ulir (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) dengan port yang ada sebelum memesan; standar campuran memerlukan adapter.
  2. Pastikan diameter luar/dalam dan kekakuan tubing (PTFE/FEP kaku vs selang lunak) agar memilih jenis fitting yang tepat.
  3. Pilih bahan body berdasarkan media: PEEK/PP/PTFE tahan kimia luas, PPS tahan suhu lebih tinggi, stainless steel tahan tekanan tinggi.

Pertanyaan umum

Standar ulir apa yang didukung?

Sebagian besar fitting menggunakan 1/4-28UNF; sebagian menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Periksa tabel spec per model sebelum memesan.

Dapatkah saya menyambung ukuran tubing berbeda?

Ya. Gunakan fitting reduksi atau adapter seperti adapter tabung keras-lunak dan multiport untuk menyambung diameter berbeda.

Apakah fitting ini tahan kimia?

Ya — body PP, PTFE, PEEK dan PPS tahan pelarut umum; verifikasi kompatibilitas media untuk model Anda.

Apakah alat instalasi tersedia?

Ya. Kit alat pengencangan torsi tangan dan pemotong tube PEEK/PTFE tersedia sebagai aksesori untuk sealing yang andal.

Tổng quan sản phẩm

FTG-IC-3P là Đầu nối côn ngược (3 mảnh). Dùng ferrule ETFE và ống lót nén thép không gỉ cho đường ống lắp sẵn.

Thông số ren: 1/4-28UNF Ống tương thích: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other ống bán cứng

Thông số kỹ thuật

Lưu ý chọn mua

  1. Khớp chuẩn ren (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) với cổng hiện có trước khi đặt; chuẩn hỗn hợp cần adapter.
  2. Xác nhận đường kính ngoài/trong và độ cứng của ống (PTFE/FEP cứng hay ống mềm) để chọn đúng loại đầu nối.
  3. Chọn vật liệu thân theo môi chất: PEEK/PP/PTFE chịu hóa chất rộng, PPS chịu nhiệt cao hơn, thép không gỉ chịu áp suất cao.

Câu hỏi thường gặp

Các chuẩn ren nào được hỗ trợ?

Hầu hết đầu nối dùng 1/4-28UNF; một số thêm M6, M8, M10, 10-32UNF hoặc 6-40UNF. Hãy xem bảng thông số từng model trước khi đặt.

Tôi có thể nối các ống khác đường kính không?

Có. Dùng đầu nối thu nhỏ hoặc adapter như adapter ống cứng-mềm và đa cổng để nối các đường kính khác nhau.

Các đầu nối này có chịu hóa chất không?

Có — thân PP, PTFE, PEEK và PPS chịu được dung môi phổ biến; hãy xác nhận tương thích môi chất cho model cụ thể.

Bạn có cung cấp dụng cụ lắp đặt không?

Có. Bộ dụng cụ siết bằng mô-men xoắn tay và máy cắt ống PEEK/PTFE có sẵn như phụ kiện để đảm bảo kín khít.

ภาพรวมผลิตภัณฑ์

FTG-IC-3P คือข้อต่อ Inverted Cone (3 ชิ้น) ใช้เฟอร์รูล ETFE และสลีฟบีบสแตนเลสสำหรับท่อประกอบล่วงหน้า

มาตรฐานเกลียว: 1/4-28UNF ท่อที่เข้ากันได้: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other ท่อกึ่งแข็ง

มาตรฐานทางเทคนิค

ข้อควรพิจารณาในการเลือก

  1. จับคู่มาตรฐานเกลียว (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) กับพอร์ตที่มีอยู่ก่อนสั่งซื้อ มาตรฐานผสมต้องใช้อะแดปเตอร์
  2. ยืนยันเส้นผ่านศูนย์กลางภายนอก/ภายในและความแข็งของท่อ (PTFE/FEP แข็ง เทียบกับท่ออ่อน) เพื่อเลือกชนิดข้อต่อที่ถูกต้อง
  3. เลือกวัสดุตัวเรือนตามสื่อ: PEEK/PP/PTFE ทนเคมีกว้าง PPS ทนอุณหภูมิสูงขึ้น สแตนเลสทนความดันสูง

คำถามที่พบบ่อย

รองรับมาตรฐานเกลียวใดบ้าง

ข้อต่อส่วนใหญ่ใช้ 1/4-28UNF บางรุ่นเพิ่ม M6 M8 M10 10-32UNF หรือ 6-40UNF ตรวจสอบตาราง spec ของแต่ละรุ่นก่อนสั่ง

สามารถต่อท่อขนาดต่างกันได้หรือไม่

ได้ ใช้ข้อต่อลดขนาดหรืออะแดปเตอร์เช่น อะแดปเตอร์ท่อแข็ง-อ่อน และ หลายพอร์ต เพื่อต่อเส้นผ่านศูนย์กลางต่างกัน

ข้อต่อเหล่านี้ทนเคมีหรือไม่

ทน ตัวเรือน PP PTFE PEEK และ PPS ทนตัวทำละลายทั่วไป ตรวจสอบความเข้ากันได้ของสื่อสำหรับรุ่นของคุณ

มีเครื่องมือติดตั้งให้หรือไม่

มี ชุดเครื่องมือ การขันด้วยทอร์กมือ และเครื่องตัดท่อ PEEK/PTFE มีเป็นอุปกรณ์เสริมสำหรับการยึดติดที่เชื่อถือได้

Gambaran produk

FTG-IC-3P ialah Inverted Cone (3-Bahagian). Guna ferrule ETFE dan sleeve mampatan keluli tahan karat untuk tiub pra-pasang.

Spesifikasi benang: 1/4-28UNF Tiub serasi: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other tubing separuh tegar

Spesifikasi

Nota pemilihan

  1. Padankan standard benang (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) dengan port sedia ada sebelum memesan; standard campuran perlu penyesuai.
  2. Sahkan diameter luar/dalam dan kekakuan tiub (PTFE/FEP tegar vs hos lembut) supaya memilih jenis fitting yang betul.
  3. Pilih bahan badan mengikut media: PEEK/PP/PTFE tahan kimia meluas, PPS tahan suhu lebih tinggi, keluli tahan karat tahan tekanan tinggi.

Soalan lazim

Apakah standard benang yang disokong?

Kebanyakan fitting menggunakan 1/4-28UNF; sesetengah menambah M6, M8, M10, 10-32UNF atau 6-40UNF. Semak jadual spec setiap model sebelum memesan.

Bolehkah saya sambung saiz tiub berbeza?

Ya. Gunakan fitting pengurangan atau penyesuai seperti adapter tiub tegar-lembut dan berbilang port untuk menyambung diameter berbeza.

Adakah fitting ini tahan kimia?

Ya — badan PP, PTFE, PEEK dan PPS tahan pelarut biasa; sahkan keserasian media untuk model anda.

Adakah alat pemasangan disediakan?

Ya. Kit alat pengencangan torq tangan dan pemotong tiub PEEK/PTFE tersedia sebagai aksesori untuk sealing yang boleh dipercayai.

Pangkalahatang-ideya ng produkto

FTG-IC-3P ay isang Inverted Cone (3-Piece). Gumagamit ng ETFE ferrule at stainless steel compression sleeve para sa pre-assembled tubing.

Pamantayan ng thread: 1/4-28UNF Tubing na tugma: For 1.6/2.0/2.5/3.0/3.2mm OD PTFE/FEP and other tubo semi-rigid

Mga detalye ng produkto

Mga paalala sa pagpili

  1. Iakma ang standard ng thread (1/4-28UNF, M6, M8, M10, 10-32UNF, 6-40UNF) sa mga port na meron ka bago umorder; ang pinaghalong standard ay nangangailangan ng adapter.
  2. Kumpirmahin ang outer/inner diameter at rigidity ng tubing (matigas na PTFE/FEP vs malambot na hose) para mapili ang tamang uri ng fitting.
  3. Piliin ang material ng katawan ayon sa media: PEEK/PP/PTFE para sa malawak na chemical resistance, PPS para sa mas mataas na temperatura, stainless steel para sa mataas na presyon.

Mga madalas itanong

Anong mga standard ng thread ang sinusuportahan?

Karamihan sa mga fitting ay gumagamit ng 1/4-28UNF; ang iba ay nagdaragdag ng M6, M8, M10, 10-32UNF o 6-40UNF. Tingnan ang spec table bawat model bago umorder.

Maaari ba akong magkonekta ng magkaibang sukat ng tubing?

Oo. Gumamit ng reducing fittings o adapters tulad ng adapter para sa matigas at malambot na tubo at maramihang port para ikonekta ang magkaibang diameter.

Ang mga fitting ba ay resistant sa kemikal?

Oo — ang mga PP, PTFE, PEEK at PPS body ay lumalaban sa karaniwang solvents; i-verify ang media compatibility para sa iyong specific model.

Nagbibigay ba kayo ng installation tools?

Oo. Ang mga paghigpit gamit ang kamay tool kit at PEEK/PTFE tube cutter ay available bilang accessories para sa maaasahang sealing.

Transparent Sourcing, Every Order

This product is sourced factory-direct from a certified Chinese manufacturer. You pay the factory price — no markup. Our income comes from the export tax rebate, not from your bill.

Request a Quote

Related Products