4-in-1 Ozone Disinfectant Residue Analyzer

4-in-1 disinfectant residue analyzer for ozone, free/total chlorine, and chlorine dioxide. Measures residues in drinking water, hospital wastewater, and industrial effluent.
✓ Transparent sourcing — factory-direct price, no markup
Request a Quote WhatsApp Us

Product Specifications

Measuring RangeOzone: 0~2.50 mg/L
Free/Total Chlorine0~3.00mg/L
Chlorine Dioxide0~5.00mg/L
Light SourceLED
Wavelength525nm
Screen DisplayLCD with backlight
Measurement ModeConcentration
Reading Division0.01mg/L
Test Accuracy≤±5%
Sample Vessels10ml round
Power Supply4 × AAA batteries
Operating EnvironmentTemperature 0~40°C, relative humidity ≤90%
Dimensions159×68×35mm
WeightApprox. 220g (with battery)
ApplicationsWater treatment, environmental monitoring, laboratories, food & beverage, aquaculture
CertificationsManufactured under ISO 9001 QMS · CE/RoHS/FDA compliance varies by model (certificates available upon request)

四合一臭氧消毒剂余量分析仪是什么?

这款四合一分析仪通过一台手持仪器即可测量臭氧、游离/总氯与二氧化氯,量程覆盖臭氧 0-2.50 mg/L、游离/总氯 0-3.00 mg/L、二氧化氯 0-5.00 mg/L,读数分度均为 0.01 mg/L。525 nm LED 光源配合试剂化学,支持现场快速消毒剂余量核查。

它由 4 节 AAA 电池供电,带 LCD 背光,重量约 220 g,便于在野外、工厂与实验室之间转移。显色反应计时结束后直接读数,无需标准曲线。

分析仪用在哪些场景?

选型建议

  1. 选择待测参数(臭氧、游离/总氯或二氧化氯);每项均使用对应试剂与量程。
  2. 在 0-40℃、相对湿度低于 90% 的环境下测试,保持比色皿清洁干燥。
  3. 使用新鲜试剂与洁净的 10 mL 样品皿,按规定反应时间后读数。

常见问题

它覆盖哪些参数?

臭氧(0-2.50 mg/L)、游离/总氯(0-3.00 mg/L)与二氧化氯(0-5.00 mg/L),均在一台设备上完成。

需要标准曲线吗?

不需要。它依据所选测试的单参数试剂定时显色反应直接读数。

便携性如何?

4 节 AAA 电池、LCD 背光、约 220 g 重量,可在野外、工厂与实验室间移动。

读数分度是多少?

三个参数均为 0.01 mg/L,可分辨微小的余量变化。

Transparent Sourcing, Every Order

This product is sourced factory-direct from a certified Chinese manufacturer. You pay the factory price — no markup. Our income comes from the export tax rebate, not from your bill.

Request a Quote