饮用水水质监测

安全饮用水既是对公共健康的承诺,也是对监管的承诺。对四项核心参数的连续监测,让您的厂合规、让消费者安心。

为何重要

测量挑战

东南亚水务企业面临双重压力:老旧水厂需升级,人口增长要求更多供水。在线分析仪以 24/7 可视化填补瞬时采样的空白——数小时而非数天捕获事件。

01

取水口

原水取水口的浊度与 pH,警示操作员上游的突变。

02

澄清与过滤

各处理阶段后的浊度,在加氯前验证过滤性能。

03

消毒

清水池的余氯,是水进入管网前的最终安全关卡。

04

配水

关键点的电导率与 pH 监控管网,标记污染或混接。

为热带水厂打造:高湿、温热的机柜与连续运行——下表型号均按 IP 防护外壳与长寿命传感器选型,适配东南亚工况。

推荐仪器

NT6000G 在线浊度分析仪

Continuous turbidity measurement for clarified, filtered, and finished water
  • Stable low-range measurement for filter performance monitoring
  • Low reagent cost, low maintenance — ideal for remote plants
  • 4-20 mA output for SCADA integration

PH6000C 在线 pH 监测仪

pH -2 to 16 (±0.02) · 3 relay outputs · 144×144 panel
  • pH control for coagulation and corrosion control in the distribution network
  • Multiple electrode options for different water chemistries
  • RS485 (Modbus) for central SCADA polling

CON6512 电感式电导率计

Inductive (toroidal) sensor · no electrode fouling · wide range
  • No plating or fouling issues — stable readings in clean and dirty water alike
  • Compact sensor installs directly in a pipe or open channel
  • Salinity display mode for brackish or coastal intakes

SEB600S 电池供电电磁水表

IP68 · battery-powered · DN up to 200+ mm · 6+ year battery life
  • No power wiring needed — ideal for remote or trench installations
  • Accurate billing and zone metering without pressure loss
  • Data logging and remote reading options for NRW reduction programs

在规划水厂升级或 NRW 项目?

告诉我们您的流量、工艺链与目标参数。我们将构建监测建议并工厂直供报价——通常工作日 24 小时内。

获取报价