| Measuring Medium | Conductive liquid |
|---|---|
| Accuracy | ±0.2%; ±0.3%; ±0.5% |
| Repeatability | 0.1% / 0.16% |
| Fluid Temperature | (-25~200) °C |
| Conductivity | ≥1us/cm |
| Nominal Diameter Range | (2~2000)mm |
| Working Pressure | 0.6MPa/1.0MPa/1.6MPa/2.5MPa/4.0MPa/6.3MPa/10.0MPa/Class150/Class300/Class600/Class900/Class1500/Class2500 |
| Flow Velocity Range | (0.3~10)m/s |
| Flow Direction | Forward / reverse |
| Electrode Material | 316L/Hastelloy B/Hastelloy C/Titanium/Tantalum/Platinum-Iridium/Platinum/Tungsten carbide/Monel |
| Lining Material | Polyurethane/ETFE/Ceramic/Neoprene/PTFE/F46/PFA/PP |
| Electrode Type | Standard electrode |
| Number of Electrodes | Four electrodes |
| Measuring Tube Material | 304 stainless steel |
| Flange Connection Material | Carbon steel / stainless steel |
| Mounting Type | Flange |
| Protection Rating | IP65/IP67/IP68 |
| Power Supply | 220VAC / 24VDC |
| Signal Output | (4~20) mA/frequency/pulse |
| Communication | HART/Modbus/FF/Profibus-DP(PA) |
| Electrical Connection | 1/2-14NPT, M20×1.5 |
| Explosion-proof Type | Non-explosion-proof / flameproof |
| Structure | Integrated / split type |
| Straight Pipe Run Requirement | 5D upstream, 3D downstream |
| Self-diagnosis Function | Excitation alarm self-diagnosis / empty pipe alarm self-diagnosis / electrode detachment self-diagnosis / coil short-circuit and open-circuit self-diagnosis / zero-point anomaly self-diagnosis / medium gas content self-diagnosis / conductivity detection and self-diagnosis / flow direction self-diagnosis / measurement accuracy real-time comparison and self-diagnosis / 4~20 mA output accuracy self-diagnosis / frequency and pulse output accuracy self-diagnosis / core board running status self-diagnosis / totalizer error self-diagnosis / flow high/low limit self-diagnosis |
| Power-off Protection | Flowmeter calculation results and user-set parameters do not disappear after power-off; EEPROM protects set parameters and accumulated values |
| Applications | Process industries, chemical, power generation, water/wastewater, oil & gas |
| Certifications | Manufactured under ISO 9001 QMS · CE/RoHS/FDA compliance varies by model (certificates available upon request) |
Ang SE11E ay isang high-performance electromagnetic flowmeter para sa mga conductive liquid, available mula DN2 hanggang DN2000 na may accuracy options na plus/minus 0.2, 0.3 o 0.5 porsiyento. Akma ito sa halos lahat ng conductive liquid duty sa process, chemical, power, water at oil and gas plants kung saan kinakailangan ang full-bore flange meter na may malakas na diagnostics.
Siyam na electrode materials mula 316L hanggang Hastelloy, tantalum, platinum-iridium at tungsten carbide, plus walong lining options mula PTFE at PFA hanggang ceramic at polyurethane, ay nagbibigay-daan upang itugma ang wetted parts sa proseso. Ang metro ay tumatakbo sa 220 VAC o 24 VDC, nagbibigay ng 4-20 mA, frequency at pulse outputs, sumusuporta sa HART, Modbus, FF at Profibus-DP(PA), at available sa integrated o split structures.
Ano ang minimum conductivity para sa SE11E?
Mga 1 uS/cm; kapag mas mababa diyan, masyadong mahina ang induced signal para sa maaasahang pagsukat, kaya karamihan ng industrial water at chemical solutions ay kayang sukatin.
Aling lining ang dapat piliin?
Gamitin ang PTFE, F46, PFA o PP para sa mga kemikal, ceramic o polyurethane para sa abrasive duty, at ETFE o neoprene kung saan pinagsama ang wear at temperatura; sabihin sa amin ang iyong media.
Maaari bang gumana ang SE11E sa aking control system?
Nagbibigay ito ng 4-20 mA, frequency at pulse outputs, at nakikipag-ugnayan sa HART, Modbus, FF o Profibus-DP(PA), kaya akma ito sa karamihan ng DCS at PLC networks.
Integrated o split version?
Piliin ang integrated meter para sa simpleng local display at ang split version kapag mahirap maabot ang sensor, mainit, o nasa masikip na pipe run.
This product is sourced factory-direct from a certified Chinese manufacturer. You pay the factory price — no markup. Our income comes from the export tax rebate, not from your bill.