Wastewater Treatment Instrumentation
Panatilihing on target ang aeration, protektahan ang biological process, at patunayan ang compliance sa discharge point. Ang instruments sa ibaba ay sumasakop sa full measurement chain ng modern wastewater treatment plant.
Bakit Mahalaga
Ang Hamon sa Pagsukat
Sa buong Southeast Asia, ang municipal at industrial wastewater plants ay itinatayo at inu-upgrade nang mas mabilis kaysa sa local instrumentation support. Ang replacement sensors ay dumarating nang mabagal, at isang unmonitored upset ay maaaring mangahulugan ng off-spec discharge at regulatory fines.
01
Inlet & screening
Ang pH at conductivity sa inlet ay nagwa-warn ng industrial dumping bago tumama sa biological stage.
02
Aeration basin
Ang Dissolved oxygen ay nagdadrive ng blower control — ang single largest energy cost sa karamihan ng WWTPs.
03
MLSS / settling
Ang Sludge concentration ay tumutukoy sa recirculation at wasting decisions. Measured, not guessed.
04
Discharge
Ang Final pH, turbidity, at flow ay nagko-confirm ng compliance bago umalis ang tubig sa iyong site.
Field-proven selection: kami ay nag-specify ng instrumentation para sa municipal at industrial WWTPs — ang bawat model sa ibaba ay matched sa harsh conditions ng real treatment plant: humidity, chemical fumes, at 24/7 operation.
Mga Inirerekomendang Instrumento
pH -2 to 16 (±0.02) · ORP ±1999 mV (±5 mV) · 3 relay outputs · 144×144 panel
- Inlet & discharge pH/ORP with configurable alarm relays for pump or dosing control
- Compatible with multiple electrode types — swap in glass, antimony, or rugged models
- 4-20 mA isolated output for PLC/DCS integration
Optical (fluorescence) DO · no membrane · no electrolyte · minimal maintenance
- No membranes or electrolyte to replace — the #1 maintenance saving in aeration control
- Auto-cleaning option for high-fouling biological basins
- Fast response for reliable blower trim control and energy savings
Infrared suspended solids measurement for activated sludge, return sludge, and effluent
- Direct MLSS monitoring in the aeration and settling stages
- Low-maintenance optical sensor, no daily cleaning required
- Available with self-cleaning options for sticky media
DN2-2000 mm · ±0.2% accuracy · measures from 1 uS/cm · HART/Modbus/Profibus
- Bidirectional flow for inlet, return activated sludge, and effluent lines
- No moving parts — no clogging on sludge, slurry, or grit-laden water
- IP68 option for submersible vault installations
Up to 14 L/min · for polymer, flocculant, and chemical dosing
- Self-priming, dry-run safe dosing for flocculant and coagulant feed
- Media contacts only the tube — no valves or seals to maintain
- Two heads in series for higher throughput on large plants
